The HP Envy 4501 may be cheap but its specifications are those of a much more expensive printer. There is support for wireless network and automatic duplex printing, for example. Unlike budget entrances in HP’s Deskjet range those with Wi-Fi, the Envy 4501 also supports HP’s ePrinting standard. This means you can set it up and it is going to print anything.
Additionally, there support for printing out of Android and iOS mobile devices, which is common to most printers and all-in-ones with wired or wireless media. It is well worth noting that HP sells the Envy 4501 below a variety of very similar version numbers, though, so whether you’re looking at an HP Envy 4501,
HP Envy 4501 Overview
This HP Envy 4501 scanner completed jobs though scans seemed to have been processed to improve their comparison, providing them with an artificial appearance. The software is unfortunate since the scanner’s capability to differentiate every color indicates that the hardware is great. In prints and copies this is an unhurried apparatus, with conventional quality text emerging at 8.7ppm, although pleasingly sharp draft text has been a bit nippier in 13.5ppm, and great enough to use to get a fair of daily printing. Although color print quality is quite good for a budget inkjet, the Envy 4501 color print speed of 1.8ppm remains sluggish in our book. Pictures were rather slow with six borderless prints carrying almost 27 minutes to print. Tested more than Wi-Fi, scan speeds were about the side of typical, but at two and a half of our photo scan was just slow.
Support Operating System
Windows XP 32bit-64bit / Windows Vista 32bit-64bit / Windows 7 32bit-64bit / Windows 8 32bit-64bit / Windows 8.1 32bit-64bit / Windows 10 32bit-64bit / Mac Os/ Linux
HP Envy 4501 Drivers for Windows
| Name File | File Download |
| HP ENVY 4500 e-All-in-One Printer series Full Feature Software and Drivers | Download |
| HP ENVY 4500 e-All-in-One Printer series Firmware Update | Download |
| HP ePrint Software for Network and Wireless Connected Printers | Download |
HP Envy 4501 Drivers for Mac OS
| Name File | File Download |
| HP Easy Start | Download |
| HP ENVY 4500 e-All-in-One Printer series Firmware Update | Download |
How To Install HP Envy 4501
If you don’t have a CD / DVD Driver for your HP Envy 4501, then since you’re able to use a CD drive, you don’t have to continue. The measures here and work together with your printer straight.
- You have to conserve the HP Envy 4501 driver setup file. Go through the setup file below to receive the setup file. Ensure that you click the one that is proper, as stated by the OS you would like to place.
- Once you save the document, you’ll have the ability to run it on your personal computer immediately you will set up the driver. The measures in the setup wizard the button finishes seem and until it’s completed.
- Then, connect the printer into a notebook or PC from the USB cable. But never link your device to a computer or a pc before the control looks contrary to your monitor screen.
- Only wait a couple of seconds, then it’ll look again, do the arrangement based on the publication.
- Your printer is intended to be utilized, to print together with the most appropriate for printing your photographs work properly.
How to Printing A Windows Test Page:
- To begin, click and switch off the switch in your device and with your notebook or pc.
- Insert paper to the holder of the printing apparatus, which will not permit it not to exceed the maximum limit which may be used in the newspaper print.
- Then, click on the Windows button, and tick the control panel.
- About the”Hardware & Sound” tab, then click on the mouse on”see devices & printers”
- Click the title of the device you just set up, then pick”Printer properties”
- The moment the”printer properties” window opens, then simply click”Print Test Page” at the ideal corner, then choose the test file that you need to print and click”Print.”
- In case your printer is functioning frequently, the print is going to be the same as you see on your PC.
How to Uninstall HP Envy 4501
When you get a printer out of a printer which you possess is uninstall your printer driver and then install a new printer driver. That is done:
- Click on the Windows button at the left place of your personal computer and then click Control Panel.
- Look from the”Programs” menu, then click on”Uninstall a schedule “
- Subsequently, the titles of that software you have installed on your computer will look.
- Locate the title of your printer then tap on the title and choose”Uninstall.”
- Once you click”Uninstall,” the procedure for deleting the printer driver has begun, you need to wait until the method is complete.
- Following the practice is complete, your previous printer driver is currently complete, and now you can set up your printer driver.
