The HP LaserJet Pro 400 offers a little impact and will quickly fit on a desk or rack. The approximate dimensions in non-use are 14 x 14 x 11-inches. The high control panel and the extended multi-purpose tray which can take the measurements closer to 14 x 25 x 15-inches. It’s obtained a nice matte black coating to it, which will undoubtedly fit rather well with your office’s interiors.
The front has a great cleaned look with two packing trays and the power switch. A USB port is housed towards the left that allows you promptly link your pen drives (not disk drives) to print papers and photos on the go. The left includes a heat vent while the power port and the printer and Ethernet ports lie at the back. The top consists of a 3.5-inch touch panel.
HP LaserJet Pro 400 Overview
HP supplies no high-yield choice for the HP LaserJet Pro 400 M401n cyan, magenta, and yellow cartridges, so if you print a lot of shade pages, this is not the printer for you. The typical dimensions cost $114 each and last for 2600 pages, working out to just under 4.4 cents per page per color. Alongside various other standard-size cartridges, these costs are a little more affordable than standard but compared with high-yield printer toners. The starter-size cartridges that ship with the printer last roughly 1400 pages.
If you can hack the printer toner costs, the result of the LaserJet Pro 400 M401n is impressive and gets here rapidly. The text is dark and sharp, and shade pictures are excellent for a shade laser at this cost. Our full-page test photo revealed a fresh color palette and beautiful details. Text pages made at 11.4 web pages per minute on the PC and 11.0 ppm on the Mac. Normal-size images printed at 3.2 ppm to plain paper and 1.5 ppm on glossy paper. Full-page pictures published at concerning 0.8 ppm.
Support Operating System
Windows XP 32bit-64bit / Windows Vista 32bit-64bit / Windows 7 32bit-64bit / Windows 8 32bit-64bit / Windows 8.1 32bit-64bit / Windows 10 32bit-64bit / Mac Os/ Linux
HP LaserJet Pro 400 Driver for Windows
| Name File | File Download |
| HP LaserJet Pro 400 M401a, M401d, M401n, M401dn, N404dw Printer Full Software and Drivers | Download |
| HP LaserJet Pro Series Firmware Update Utility | Download |
| HP ePrint Software for Network and Wireless Connected Printers | Download |
| HP Print and Scan Doctor for Windows | Download |
HP LaserJet Pro 400 Driver for Mac Os
How To Install HP LaserJet Pro 400
If you don’t have a CD / DVD Driver for your HP LaserJet Pro 400, then since you’re able to use a CD drive, you don’t have to continue. The measures here and work together with your printer straight.
- You have to conserve the HP LaserJet Pro 400 driver setup file. Go through the setup file below to receive the setup file. Ensure that you click the one that is proper, as stated by the OS you would like to place.
- Once you save the document, you’ll have the ability to run it on your personal computer immediately you will set up the driver. The measures in the setup wizard the button finishes seem and until it’s completed.
- Then, connect the printer into a notebook or PC from the USB cable. But never link your device to a computer or a pc before the control looks contrary to your monitor screen.
- Only wait a couple of seconds, then it’ll look again, do the arrangement based on the publication.
- Your printer is intended to be utilized, to print together with the most appropriate for printing your photographs work properly.
Read also: HP LaserJet Pro MFP M426fdw Driver, Manual, Software, and Downloads
How to Printing A Windows Test Page:
- To begin, click and switch off the switch in your device and with your notebook or pc.
- Insert paper to the holder of the printing apparatus, which will not permit it not to exceed the maximum limit which may be used in the newspaper print.
- Then, click on the Windows button, and tick the control panel.
- About the”Hardware & Sound” tab, then click on the mouse on”see devices & printers”
- Click the title of the device you just set up, then pick”Printer properties”
- The moment the”printer properties” window opens, then simply click”Print Test Page” at the ideal corner, then choose the test file that you need to print and click”Print.”
- In case your printer is functioning frequently, the print is going to be the same as you see on your PC.
How to Uninstall HP LaserJet Pro 400
When you get a printer out of a printer which you possess is uninstall your printer driver and then install a new printer driver. That is done:
- Click on the Windows button at the left place of your personal computer and then click Control Panel.
- Look from the”Programs” menu, then click on”Uninstall a schedule “
- Subsequently, the titles of that software you have installed on your computer will look.
- Locate the title of your printer then tap on the title and choose”Uninstall.”
- Once you click”Uninstall,” the procedure for deleting the printer driver has begun, you need to wait until the method is complete.
- Following the practice is complete, your previous printer driver is currently complete, and now you can set up your printer driver.
